Automatic locks
Mechanical Locks
V90 VIRO LOCK 12v
The Viro V90 can be mounted vertically (ground latch) or horizontally (post latch) and is supplied by MEG with both keeps. The lock wires directly to the lock output on the system control panel and is supplied with 2 keys. The lock body measures 130mm wide x 105mm deep (used horizontally) and zinc coated.
EBP 24v DROP LOCK
The EBP lock mounts to the base of the gate and locks in to a floor mounted plate (provided). The lock is energised and lifts it’s bolt whilst the gate operator/s are running and drops in place when they time out. The EBP lock is provided with a 240 / 24v transformer and 2 release keys. the lock body measures 218 x 70 x 70 mm
EBP E
With extended barrel for solid / wooden gates is also available.
AUTOBOLT ~ Ground stake
The Autobolt is a non powered spring bolt that mounts to the base of the 1st gate to close. The 2nd gate pushes the bolt in to the ground plate (not provided) on closing and is locked to the 1st gate with an electronic lock ( i.e. Viro or magnetic lock)
Magnetic Locks
Magnetic locks are supplied with armature plates and the two are held together magnetically when power is applied. The armature plate is allowed to float on it’s mounting plate in order that it squares up face to face with the magnet when fitted to uneven surfaces. On single gates the magnet can be fitted to the slam post and the armature to the gate, alleviating the need to run a cable across the moving gate. Mounting plates are generally tailor made by the installer to suit individual applications. The exterior rated magnets below provide up to 500kg (1200 lb) holding force.
GS 65 Magnet ~ Exterior Rated. 400lb Holding force
Circular magnet with cable gland. Useful little lock for Hold open & Hold closed. The small 65mm round shape is easy to fit to open gate stops.
PGL 600 Magnet ~ Exterior Rated. 1200lb Holding force.
This powerful magnet measures 190 x 60 mm and has a gland to accept an M20 fitting.
ARD 12 PSU ~ A 12v dc 0.5a power supply for above magnets
DRA 18-12 12v 1.5a Power Supply
Fully regulated with internal fuse protection. Input from 100 - 240v. A high quality power supply unit with reduced dimensions (only 22mm wide) and quick fit snap terminals. Dimensions are 22 x 90 x 100 mm). For DIN rail mounting.
Manual Locks
We have a huge range of coded, keyed, and electronic lock systems for our manual range of gates as well as the traditional latches and catches
Supply only or Supply and fit
We can carry out an entire contract from start to finish from the initial site visit to the planning, manufacturing, installation, automation and access control call us on 01455 550015 to discuss your requirements or email details and/or plans by clicking here